Limited Time Offer: Purchase the NewBeeDrone AcroBee65 BLV4 BNF Ghost and receive a free activation key for the new FPV.SkyDive Whoop DLC!


About the Drone:


  • New AcroBee65 BLV4 Ghost BNF drone with built-in ImmersionRC Ghost Receiver and dual ball bearing flow motor 27000KV
  • New and refreshed appearance in red, white and black color and qT Antenna
  • On-board temperature regulation prevents damage to Boards
  • Powerful image transmission for long range flying

Drone Size: 65mm
Flight Controller: BeeBrain BLV4 GHOST build in VTX and Ghost Receiver
Frame: Cockroach65 Brushless Frame (Sold White Color)
Motors: Flow 0802 27000kv Double Ball Bearing Brushless motor
Propellers: Azi Tri-Blade 31mm Propeller(Ruby Red Color)
Camera: BeeEye Camera
Canopy: Goober Canopy v1(Ruby Red Color)
Total Weight of the Drone without battery: 24.8g


MCU: STM32F411
VTX: Switchable output power from 5mw- 25mw(for Racing) - SmartMAX(SmartMax up to 400mw)  with BeeTX 5.8Ghz Antenna
ESC: 12A BLHeliS Pre-Flash with Bluejay 0.18 target: S-H-40 48kHz
ESC Connector: JST-1.0 3Pin
OSD: NBD7456 Graphical OSD compatible with Betaflight OSD
Receiver: GHOST 2.4G receiver with GHOST 2.4G qT Antenna
Flight Controller Weight: 6.5g(Include antennas and battery connector)
Flight Controller Size: Outer dimensions: 29x29x7.6mm
Flight Controller Holes: 25.5x25.5mm
Battery input: 1-2S (For 2S you will need to set throttle cap at less 50%)
Uart2: Tx for GHOST 2.4G Receiver
Uart1:  Tx&Rx free
Power Connector: NBD-PH2.0 connector

What’s included: 

1x NewBeeDrone x ImmersionRC AcroBee65 BLV4 BNF Ghost 27000KV

Warning: This drone has been carefully crafted using only NewBeeDrone parts. It is important to note that any use of non-compatible parts from other brands may result in technical difficulties. Additionally, should you choose to modify the drone, it is crucial that you assume full responsibility for any resulting issues. It is not advisable to proceed with modifications without the necessary knowledge and expertise. We appreciate your understanding and cooperation in ensuring the safe operation of the drone.

Note* The 27000kv motor on your device is designed for high performance and may be too strong for most users. To ensure safety, the factory has set the device to only use 80% of the maximum power by default. However, if you require more power, it is possible to adjust the settings through the Betaflight software, which can be accessed under the PID tab. Please note that increasing the power beyond the default setting may increase the risk of damage to the device or injury to yourself or others, and should be done with caution.

Products you may like:

Recently viewed